ilsb-0603 www.vishay.com vishay dale revision: 10-jun-15 1 document number: 34027 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 monolithic chip inductors mechanical specifications solderability: 90 % coverage after 5 s dip in 235 c solder following 60 s preheat at 120 c to 150 c and type r flux dip resistance to solder heat: 10 s in 260 c solder, after preheat and flux per above termination: 100 % sn terminal strength: 0.5 kg for 30 s beam strength: 0.3 kg features ? high reliability ? surface mountable ? magnetically self shielded ? nickel barrier plating virtuallly eliminates silver migration ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 environmental specifications operating temperature: -55 c to +125 c thermal shock: -40 c to +85 c humidity: 90 % rh at 40 c, 1000 h at full rated current load life: 85 c for 1000 h at full rated current standard electrical specifications inductance (h) tol. thickness d (inches [mm]) test freq. (mhz) q min. srf min. (mhz) dcr max. ( ? ) rated dc current (ma) l and q 0.047 20 % 0.031 0.008 [0.80 0.2] 50 10 260 0.15 50 0.068 20 % 0.031 0.008 [0.80 0.2] 50 10 250 0.25 50 0.082 20 % 0.031 0.008 [0.80 0.2] 50 10 245 0.25 50 0.10 10 % 0.031 0.008 [0.80 0.2] 25 15 276 0.50 50 0.12 10 % 0.031 0.008 [0.80 0.2] 25 15 236 0.50 50 0.15 10 % 0.031 0.008 [0.80 0.2] 25 15 207 0.60 50 0.18 10 % 0.031 0.008 [0.80 0.2] 25 15 190 0.60 50 0.22 10 % 0.031 0.008 [0.80 0.2] 25 15 173 0.80 50 0.27 10 % 0.031 0.008 [0.80 0.2] 25 15 157 0.80 50 0.33 10 % 0.031 0.008 [0.80 0.2] 25 15 144 0.85 35 0.39 10 % 0.031 0.008 [0.80 0.2] 25 15 127 1.00 35 0.47 10 % 0.031 0.008 [0.80 0.2] 25 15 121 1.35 35 0.56 10 % 0.031 0.008 [0.80 0.2] 25 15 110 1.55 35 0.68 10 % 0.031 0.008 [0.80 0.2] 25 15 104 1.70 35 0.82 10 % 0.031 0.008 [0.80 0.2] 25 15 98 2.10 35 1.0 10 % 0.031 0.008 [0.80 0.2] 10 35 87 0.60 25 1.2 10 % 0.031 0.008 [0.80 0.2] 10 35 74 0.80 25 1.5 10 % 0.031 0.008 [0.80 0.2] 10 35 69 0.80 25 1.8 10 % 0.031 0.008 [0.80 0.2] 10 35 64 0.95 25 2.2 10 % 0.031 0.008 [0.80 0.2] 10 35 58 1.15 15 2.7 10 % 0.031 0.008 [0.80 0.2] 10 35 52 1.35 15 3.3 10 % 0.031 0.008 [0.80 0.2] 10 35 46 1.55 15 3.9 10 % 0.031 0.008 [0.80 0.2] 10 35 41 1.70 15 4.7 10 % 0.031 0.008 [0.80 0.2] 10 35 38 2.10 15 5.6 10 % 0.031 0.008 [0.80 0.2] 4 30 22 1.55 15 6.8 10 % 0.031 0.008 [0.80 0.2] 4 30 20 1.70 15 8.2 10 % 0.031 0.008 [0.80 0.2] 4 30 18 2.10 15 10 10 % 0.031 0.008 [0.80 0.2] 2 30 17 2.55 15 description ilsb-0603 3.3 h 10 % er e3 model inductance value inductance tolerance package code jedec ? lead (pb)-free standard global part number i lsb 0603 er 3r3 k product family size package code inductance value tol.
ilsb-0603 www.vishay.com vishay dale revision: 10-jun-15 2 document number: 34027 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches [millimeters] abcdefgh 0.063 0.006 [1.6 0.15] 0.031 0.006 [0.8 0.15] 0.012 0.006 [0.3 0.15] 0.031 0.008 [0.8 0.2] 0.105 [2.7] 0.035 [0.9] 0.025 [0.64] 0.040 [1.0] tape and reel specifications 0603 size per eia-481-1 in inches [millimeters] a 0 0.045 0.004 [1.14 0.1] b 0 0.068 0.004 [1.75 0.1] d 0 0.059 + 0.005/- 0.000 [1.5 + 0.127] d 1 0.039 min. [1.0 min.] e 1 0.069 0.004 [1.75 0.1] f 0.138 0.002 [3.50 0.05] k 0 0.045 0.002 [1.15 0.05] p 0 0.157 0.004 [4.00 0.1] p 1 0.157 0.004 [4.00 0.1] p 2 0.079 0.002 [2.00 0.05] w 0.327 max. [8.3 max.] t 0.008 0.002 [0.2 0.05] a 7.000 0.079 [178 2.0] n 2.500 [63.5] c 0.512 0.020 [13.00 0.50] w 1 0.315 + 0.059/- 0.000 [8.00 + 1.5] t 1 0.079 0.002 [2.00 0.05] 100 % s n termination a b d ferrite bo d y dimensional outline c s u gg este d pa d layout h g f e 4000 piece/reel p 2 p 0 b 0 ?d 1 a 0 p 1 ?d 0 e 1 f w t k 0 ? c ? n ? a t 1 w 1 empty trailer components 160 mm minimum empty tape 160 mm minimum 3 90 mm minimum cover tape lea d er unreel direction
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
